Making Folding Patio Doors

Jun 12th

Folding patio doors-Measure the width and height of the door. Buy two utility door that is half the width of it. An opening of 71.12 cm require two panels of 35.56 cm. The door panels should be 2.54 to 5.08 cm shorter than under it, if you try to place a rail system. Cut both panels at the same height as necessary to reduce the height of the door. You can crop the hollow core doors 2.54 cm above and below if necessary. Cut it slowly as the outside of the hollow laminate door panel tends to splinter.

The Folding Patio Doors
The Folding Patio Doors

Trim the width of each panel 0.32 cm to accommodate hinges. If the folding patio doors are wider than the opening cut 2.54 cm on each side further, if necessary. If you use your folding door blinds, cut both sides of each panel, halfway to maintain a balanced appearance. Sand the cut gently and exposed edges with sandpaper.

12 Photos Gallery of: Making Folding Patio Doors

Image of: Brilliant Folding Patio Doors
Image of: Double Folding Patio Doors
Image of: Folding Patio Doors Design
Image of: Folding Patio Doors Ideas
Image of: Folding Patio Doors Image
Image of: Folding Patio Doors Models
Image of: Folding Patio Doors Photo
Image of: Folding Patio Doors Pictures
Image of: Luxury Folding Patio Doors
Image of: Modern Folding Patio Doors
Image of: Oak Folding Patio Doors
Image of: The Folding Patio Doors
 
RELATED :  How to Match Thermofoil Cabinet Doors

Board two panels or shutters, with three piano hinges. Place the panels in the floor, align them by the edges and secure with clamps to prevent movement while installing the hinges. Place the folding patio doors in the final position and check whether the space is appropriate and if the hinges are folded in the right direction.